Improvement of permanent memory effect in PDLC films using TX-100 as an additive

A number of polymer dispersed liquid crystal (PDLC) films based on dimethacrylate monomers were synthesised by polymer-induced phase separation (PIPS) using polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (TX-100) as an additive up to total solution weight of 10% aiming to modify the initial anchorage force of the liquid crystal (LC) molecules to the polymeric matrix. The effects of the addition of this additive to the PDLC films were studied resorting to electro-optical studies. Using a fitting model, several parameters were correlated such as the permanent memory effect (PME), the voltage required to achieve 90% of maximum transmittance (E90), the average elastic constant (K) and the rotational viscosity of the director (γ). The use of TX-100 results on an increase on the PME and γ, and decrease on the E90 and K.     

A Mixed Mann Iteration Process for Fixed Points of Mixed Increasing Operators in Ordered Banach Spaces

In this paper, we develop a new mixed Mann iteration process to approximate the fixed points of mixed increasing operators in ordered Banach spaces and discuss the convergence analysis of the iterative sequences generated by the iteration process. As an application, we develop a new iterative method for solving a class of nonlinear integral equations.     

Fixed and periodic point theory in certain spaces

This paper proves the existence of periodic and fixed points for contractive conditions in metric (symmetric) space.     

Effect of thickness of CdTe/Ge heterojunction photodetectors on optoelectronic properties

The influence of the thickness of CdTe/n-Ge heterojunction photodetectors on I–V curves was studied experimentally and theoretically. The thicknesses of the CdTe thin films were 110, 130, 150, and 200 nm. The power intensity of illumination was 150 mW/cm². Increasing the thickness led to an increase in photocurrent.     

C K‐edge NEXAFS study of fluorocarbon formation on carbon anodes in molten NaF–AlF3–CaF2

Operational instability from processes occurring at the anode during the production of aluminum in the commercial Hall‐Héroult process may lead to an increase in undesirable fluorocarbon emissions, higher energy use, and shorter plant life. One contribution to this instability may be the possible formation of a fluorocarbon film at the electrode interface. Here, the surface composition of graphite anodes after electrolysis in molten NaF–AlF₃–CaF₂ at 990 °C is investigated for evidence of fluorocarbon formation using C K‐edge near edge X‐ray absorption fine structure. Fluorocarbon is identified on an anode surface after prolonged anode effect (very high overpotential with increased cell resistance) and also on an anode surface after normal electrolysis without anode effect. This provides evidence that fluorocarbon formation may occur prior to anode effect lowering the surface tension of the anode and therefore resulting in dewetting to contribute to the onset of the anode effect. Confirmation that such compounds form furthers our understanding of electrochemical reactions of graphite with fluoride and of the fundamental processes that occur in an aluminum smelter cell. Copyright © 2013 John Wiley & Sons, Ltd.     

Highly Efficient α‐Sialylation by Virtue of Fixed Dipole Effects of N‐Phthalyl Group: Application to Continuous Flow Synthesis of α(2‐3)‐and α(2‐6)‐Neu5Ac‐Gal Motifs by Microreactor

Highly α‐selective sialylation of sialic acid N‐phenyltrifluoroacetimidate with various galactose and lactose acceptors has been achieved by introducing the C‐5 N‐phthalyl group on the donor. The “fixed dipole effect” of the N‐phthalyl group was proposed to explain the high reactivity and α‐selectivity. The microfluidic system was applied to the present α‐sialylation, which is amenable to large‐scale synthesis. The N‐phthalyl group was removed by treatment with methylhydrazine acetate, for which protocol can be readily applied to the synthesis of a variety of sialic acid‐containing oligosaccharides.      

Chebyshev centers and fixed point theorems

Brodskii and Milman proved that there is a point in C(K)$C(K)$, the set of all Chebyshev centers of K, which is fixed by every surjective isometry from K into K whenever K   is a nonempty weakly compact convex subset having normal structure in a Banach space. Motivated by this result, Lim et al. raised the following question namely “does there exist a point in C(K)$C(K)$ which is fixed by every isometry from K into K?”. In fact, Lim et al. proved that “if K is a nonempty weakly compact convex subset of a uniformly convex Banach space, then the Chebyshev center of K is fixed by every isometry T from K into K”. In this paper, we prove that if K   is a nonempty weakly compact convex set having normal structure in a strictly convex Banach space and F$\mathfrak{F}$ is a commuting family of isometry mappings on K   then there exists a point in C(K)$C(K)$ which is fixed by every mapping in F$\mathfrak{F}$.     

Factorization of Integer-Valued Polynomials with Square-Free Denominator

We describe an algorithm to compute the different factorizations of a given image primitive integer-valued polynomial f(X) = g(X)/d ∈ ?[X], where g ∈ ?[X] and d ∈ ? is square-free, assuming that the factorizations of g(X) in ?[X] and d in ? are known. We translate this problem into a combinatorial one.     

单分子电导测量技术及其影响因素

Molecular electronics is an important field for the application of nanotechnologies with an ultimate goal of building functional devices using single molecules or molecular arrays to realize the same functionality as macroscopic devices. To attain this goal, reliable techniques for measuring and manipulating electron transfer processes through single molecules are essential. There are various techniques and many environmental factors influencing single-molecule electronic conductance measurements. In this review, we first provide a detailed introduction and classification of the current well-accepted techniques in this field for measuring single-molecule conductance. All available techniques are summarized into two categories: the fixed junction technique and break junction technique. The break junction technique involves repeatedly forming and breaking molecular junctions by mechanically controlling a pair of electrodes moving into and out of contact in the presence of target molecules. Single-molecule conductance can be determined from the conductance plateaus that appear in typical conductance decay traces when molecules bind two electrodes during their separation process. In contrast, the fixed junction technique is to fix the distance between a pair of electrodes and measure the conductance fluctuations when a single molecule binds the two electrodes stochastically. Both techniques comprise different application methods and have been employed preferentially by different groups. Specific features of both techniques and their intrinsic advantages are compared and summarized in Section 4.